First things first:
If any problems arise, please contact me before writing bad comments or giving one star ratings. ;)
>>>> Please send me your FSUIPC7.ini and FSUIPC7.log to nils[at]public-files.de after a flight you had problems with. <<<<
This is a FSUIPC7 Lua plugin, which dynamically plays the callouts you would hear from the pilot monitoring (PM) in an Airbus A320 series flight deck during takeoff and landing (including rejected takeoff, go-around and touch-and-go). It is to be used with the FENIX A320 series ONLY.
What it does:
- The plugin runs automatically upon loading the FENIX A320 add-on.
- Before takeoff, the V-speeds must be entered on the PERF page of one of the MCDUs (as usual).
- The following callouts are included:
- Takeoff: STABILIZED, FLEX SET / TOGA SET, AIRSPEED ALIVE, 100 KNOTS, VEE ONE, ROTATE, POSITIVE CLIMB, CLIMB SET
- Landing: SPOILERS, REVERSE GREEN, DECEL, 70 KNOTS, AUTOBRAKE OFF
- Gear confirmation: GEAR UP, GEAR DOWN
- Flaps confirmation: FLAPS UP, FLAPS 1, FLAPS 2, FLAPS 3, FLAPS FULL
- Special: STOP (rejected takeoff), STAND UP, GO (touch-and-go)
PMCO_FNX32X (Takeoff Demo) - YouTube
PMCO_FNX32X (Landing Demo) - YouTube
Important notes and prerequisites:
- Registered version of FSUIPC7 (for MSFS) is required! The free version is not sufficient, unfortunately!
- Please, follow carefully the included readme for installation instructions (PMCO and FSUIPC + WASM-module)!
On request, there is now also a video, guidung you through the installation: PMCO_FNX32X (Install Guide) - YouTube
- If MSFS is run as admin, FSUIPC7 must also be run as admin. Either both or none!
Credits:
The default soundset was recorded by Nick Kidd. Big thanks to him!
This (my Lua plug-in) is free to use. However, if you like my work and wish to donate, it would be greatly appreciated: paypal.me/payNilsU
I wish you safe flights and happy landings!
Nikolaich
bokepacha
dermobb author
20 days ago
Ajgamernz
BattleOverlord
dermobb author
27 days ago
dvdaart
******** FSUIPC7, Version 7.4.9 (17th March 2024) by John Dowson *********
**** New version available: version 7.4.12 is available ****
MS Store installation detected: Checking for FS path in 'C:\Users\Admin\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalCache\UserCfg.opt'
FS path found = C:\Users\Admin\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalCache\Packages\
WebSocket server found: D:\MSFS2020 addons\FSUIPC7\\Utils\FSUIPCWebSocketServer.exe
Windows 11 detected - setting DisableMSFSMonitor to 'Enum'
Windows 10 Pro 64 Bit reported as Build 22631, Release ID: 2009 (OS 10.0)
Reading options from "D:\MSFS2020 addons\FSUIPC7\FSUIPC7.ini"
Checking the Registrations now ...
User Name=XXX
User Addr= XXX
FSUIPC7 Key is provided
WIDEFS7 not user registered, or expired
32 System time = 31/05/2024 13:38:16
32 FLT path = "C:\Users\Admin\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalState\"
32 Allowing calibration when not assigned with 'Send direct to FSUIPC Calibration'
47 -------------------------------------------------------------------
63 Preset file 'D:\MSFS2020 addons\FSUIPC7\myevents.txt' not found [info only]
63 14034 Calculator Code presets have been loaded and are available for use
79 Registered HotKey 'InvokeFSUIPCOptionsKey' (key=0x46, modifier=0x1)
94 FS path = "C:\Users\Admin\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalCache\Packages\"
94 ---------------------- Joystick Device Scan -----------------------
94 Product= TCA Q-Eng 1&2
94 Manufacturer= Thrustmaster
94 Serial Number= 00000000001A
94 Vendor=044F, Product=0407 (Version 2.0)
125 GUIDs returned for product: VID_044F&PID_0407:
125 GUID= {3351E310-1CE0-11ED-801B-444553540000}
125 Details: Btns=31, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R65535,U65535,V65535,X65535,Y65535,Z65535
125 Product= T.A320 Copilot
125 Manufacturer= Thrustmaster
125 Serial Number= 1
125 Vendor=044F, Product=0406 (Version 2.0)
125 GUIDs returned for product: VID_044F&PID_0406:
125 GUID= {33520A20-1CE0-11ED-801C-444553540000}
125 Details: Btns=17, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R255,U0,V0,X16383,Y16383,Z255
125 -------------------------------------------------------------------
125 Device acquired for use:
125 Joystick ID = 1 (Registry okay)
125 1=TCA Q-Eng 1&2
125 1.GUID={3351E310-1CE0-11ED-801B-444553540000}
125 Device acquired for use:
125 Joystick ID = 3 (Registry okay)
125 3=T.A320 Copilot
125 3.GUID={33520A20-1CE0-11ED-801C-444553540000}
125 -------------------------------------------------------------------
157 **** Not writing buttons back as no button actions found!!
172 LogOptions=00000000 00000001
3079 Simulator detected
68079 **** SimConnect open event not received in required time limit: Re-connecting now...
73282 **** SimConnect open event not received in required time limit: Re-connecting now...
78500 **** SimConnect open event not received in required time limit: Re-connecting now...
83719 **** SimConnect open event not received in required time limit: Re-connecting now...
88938 **** SimConnect open event not received in required time limit: Re-connecting now...
94157 **** SimConnect open event not received in required time limit: Re-connecting now...
99360 **** SimConnect open event not received in required time limit: Re-connecting now...
104579 **** SimConnect open event not received in required time limit: Re-connecting now...
109797 **** SimConnect open event not received in required time limit: Re-connecting now...
115016 **** SimConnect open event not received in required time limit: Re-connecting now...
120235 **** SimConnect open event not received in required time limit: Re-connecting now...
125454 **** SimConnect open event not received in required time limit: Re-connecting now...
130657 **** SimConnect open event not received in required time limit: Re-connecting now...
dermobb author
28 days ago
ButterkeksEU
dermobb author
1 months ago
Nickvr59
Sincerely...
dermobb author
1 months ago
aviationn98
dermobb author
1 months ago
AircraftOverview
Just followed the install instructions on and noticed that only some of the callouts are working on my system. I've tried 2 take-offs where only calls made were"Flaps 2" when initially setting the flaps, "Stabalised", and "100 knots". My v-speeds were programmed correctly in the PERF page, and no positive rate, gear up, or flap retraction calls were made following rotation. Any help in fixing this would be greatly appreciated, thank you 😊
dermobb author
1 months ago
AlainRobert70
Great job.
Just a remark: The v1 and rotate speed are announced before the ses speeds are reached.
I had my V1 set to 131 and rotate at 142, and the annoucements occured more or less at 120 and 130.
Have you an idea to fix this ? and this will be great
dermobb author
1 months ago
EddiZ
I suspect that the audio device is not being handled correctly (my mistake probably).
If you want I can send you the logs of FSUIPC7.log the PMCO_FNX32X.log and the FSUIPC7.ini
Thank you
dermobb author
1 months ago
saltybutter
LOVE IT SO MUCH
bokepacha
Thanks for the update.
Stefan7136
KeViStOo
dermobb author
2 months ago