MSFS TBM 930 StreamDeck XL and PLUS Profile for LORBYs AxisAndOHs (AAO) and its SD Plugin
You need LORBYs AAO and its StreamDeck Plugin to run this StreamDeck profile
SD plugin could be found on the bottom of the download site
NEW:
Labels of the PFD softkeys do show now the approbiate dynamic text.
NOTE:
You need the StreamDeck plugin 29.01 (or higher) from the AAO download page. ("Plugin for the Elgato Stream Deck")
You need also the "MSFS: G3000 Bridge" from the same side
ATTENTION!
PLEASE READ CAREFULLY!
- When you import SD profiles, make sure to delete the old ones, otherwise you'll get profile copies.
- Make sure to always have the latest AAO and AAO StreamDeck plugin versions!
- I just create the SD profiles! For any connection issues, SD plugin not working, Buttons show "?" or nothing, no reaction of the SD etc., please contact the developer of AAO! And please read the AAO Manual or the short Troubleshooting PDF
- It is - as the title says - just for the StreamDeck XL (!). Please do not ask for a 15 button conversion. This will not happen as this will more than double the amount of development and support for me as I do not have a 15 button SD. Sorry.
- Please ask if you want to use parts of my SD profiles, icons or AAO scripts or whatever! And please ask everytime you start a new project! You have to credit and link me in your description!
- If you use my work, you are then NOT allowed to beg for own donations!
Features:
All deice working
Display brightness
Cockpit lights Pilot/Copilot
MFD/PFD Zoom
Instrument light dimmer
IGN, BLEED and AUX BP as animated 3 way switch
CUT OFF button to toggle throttle from cut off to starting position and back
TBM style AP
Installation:
- Doubleclick on the TBM 930.streamDeckProfile to install it
- Import the AxisAndOhsScripts_TBM.xml into AAO.
- If you have a StreamDeck PLus, please doubleclick onto the PLUS TBM.streamDeckProfile
- Download and open the "zzz-lorbysi-aao-wtg3000.zip" and drop it into (or link it to) your community folder!
- you can use my Standard Avionics Suite
Known Isses:
PFD/MFD brightness does autoadjust to environmental brightness. Have not found the correct code until now, so will reset its brightness itself probably.
It is a lot of work to do these icons and gather the variables. If you like it, please consider a little donation, thx!
regards,
Brian
25 days ago
25 days ago
Guenseli
brian210
I downloaded the TBM930 profile, and everything went OK, but when I looked in Streamdeck to find the TBM "Landing/Taxi/Off" switch ..... it is Missing. Ive tried several times to install the profile into Streamdeck, but with same results every time ... ie "Landing/Taxi/Off" switch ..... it is Missing.
I need help if I'm doing something wrong.
thank you in advance
Brian
25 days ago
brian210
5 months ago
Viking31
Other wise loving your profiles. only thing I need to added was a parking break engage and disengage.
6 months ago
6 months ago
Guenseli
GoofySGB
8 months ago
5 months ago
peacemaker0079
LuizAnesio
Presumably the G3000 related functions could be imported into a SF50 Vision profile ?
9 months ago
Maybe, can't say for sure
9 months ago
Guenseli
Gabe777
Hi dear, is it normal that in stream deck plus, the nav buttons com and xpdr are assigned the Defoult Profile command?
10 months ago
Yes, they are linked to my default avionics suite you can also download here
10 months ago
Guenseli
Dix
Great work! I used the TBM 2_6_TAg3p with my Streamdeck XL and Axis and Oh's 3.00 before and switched to BM 2_7_wTzbF today. You spent a lot of time testing the buttons, but I found a bug in the Autopilot VS. I cannot change the rate of climb/descent (Nose up/Nose down) nothing happens. This was fully working in Version 2.6. Can you please have a look if this works in your configuration?
Many regards DuoBus
11 months ago
Would you increase your star rating when I fix it or should I only fix it if you increase you star rating??? ;)
11 months ago
Guenseli
DuoBus
This is good stuff. Thank you for your continue effort in making this better and better!
1 years ago
meochan
Hi, do you perhaps plan to have an update for your TBM 930 profile since the most recent AAU1 update? Some of the buttons and switches seem to not work since the AAU1 update?
Thanks and 10/10 for your profiles, I like them a lot.
1 years ago
Can you please be more precise what is not working?
I just checked and every switch is working here.
Do you use the AAU1 version or do you use the enhanced version from the Store?
If so, please make a test without the enhanced version, would be useful to know if there's a difference. I do not use the enahnced version currently
1 years ago
Guenseli
nehpetsa
Hi Guenseli, I am in the AAU I and I cant get the Inert Sep Toggle to work. Is the BVAR DEICE_Engine_1 still working for you?
1 years ago
Hallo Marco,
I use the B:DEICE_Engine_1_Toggle
And to see its state I use: L:XMLVAR_InertSep1_Deployment, Number
Hoffe, das hilft?!
1 years ago
Guenseli
JayDee
If you have greyed out buttons, no reaction of the StreamDeck, exclamation marks etc, that means you have connections issues between AAO and the StreamDeck.
94% of all support request are due to no proper connections or outdated versions of AAO and/or the AAO SD plugin.
Check ports, check the troubleshooting PDF, contact AAO support.
My Streamdeck profiles work (beside from probably little bugs). If you have such issues, I can't help you, sorry! Support requests can't not solved by me as I'm not the developer of AAO!
1 years ago
Guenseli
No idea where I am going wrong, spent the last 12+ hours trying to figure out why when I import a profile it has heaps of buttons just grayed out. If tried changing ports, adding ports to my firewall, reinstalling streamdeck/aao's. Updated both streamdeck/aaos. I've even went as far to completely disable my firewall, tried downloading different aao/streamdeck profiles. Any help here or suggestions would be amazing!
1 years ago
Please contact the AAO support!
1 years ago
Guenseli
ResinatedCaser
What means „ AAU“ ?
1 years ago
Aircraft & Avionics Update
1 years ago
Guenseli
MikeJuliet
Some buttons not working for me : source battery, lights, fuel sel...
1 years ago
Forgot to mention in the description that it is for AAU (beta).
Added this.
I assume you are NOT in the beta?
1 years ago
Guenseli
icar17