Indlæsning...

World War 2 RAF Tilstock Airport EGCT

World War 2 RAF Tilstock Version 0.62 Rebuilt under Update 6 and SDK 14.1.  I have also uploaded a fresh version of the project folder wihich also has all the FreeCAD and Blender 3D models used so you can have a go at doing your own...

Om

World War 2 RAF Tilstock Version 0.62

Rebuilt under Update 6 and SDK 14.1.  I have also uploaded a fresh version of the project folder wihich also has all the FreeCAD and Blender 3D models used so you can have a go at doing your own version or use the models in your own Airport.

World War 2 RAF Tilstock Version 0.5

Added a perimeter fence which is a total of over 3 kilometres long in multiple sections.
Added a control tower built in blender using Archipac to make nice looking doors and windows.
Greatly improved the Blender made hangars.
Slightly improved the models of the Lancaster Bombers.


Further improvements are planned based on the extensive historical information available in Whitchurch Shropshire from the local Heritage centre once restrictions are lifted and access becomes easier.  This next stage is unlikely to yield a further update before 2022.

ZIp file of project folder included which includes all Blender Models (Hangars and Fences etc.) and the FreeCad model for the Hangar which was exported to Blender in multiple STL  files..

The Blender 3D fence models are designed to allow a string of fence sections, of any length (made from a set of parts using an array modifier), to be positioned on uneven ground ; however for this version I took the easy way out of leveling the ground using terraforming so that the whole airport is level.   If anyone wants the procedure for using the fence models which involves exporting from blender to SDK versions with markers to aid positioning and then overwriting with versions without markers, then please message me..

The Hangar models were also improved, by adding foundations to make them sit better on uneven ground and using a completly different method to make the roof windows inspired by the way the Archipac add on for Blender makes openings and windows.

In the Blender Model each of the 12 sliding doors is a separate moveable item so its quite easy to set the doors in any position.

About World War 2 RAF Airfields

There was an RAF airport here in World War two with three runways that are still discernible on the satellite view.  

I am working to gradually add more and more of the original WW2 Airport and local scenary.

History:

9,000 miles Of Concrete; a report on the hundreds and hundreds of WW2 Airfilelds Historic England Report

Pictures of the \airport as it is now:

www.ukairfields.org.uk/tilstock

The original Control Tower has been preserved see www.controltowers.co.uk/T-V/Tilstock.htm.

More Photoes:  Aerial and Other Pics

Details
Kompatibilitet
Sim Update 11 0 0
Oprindelig udgivelse
December 29, 2020
Sidst opdateret
1 year(s) ago — 0.62

Version

0.62

Filstørrelse

18.63 MB

Downloads

868

Denne fil er blevet scannet for virus og er sikker at downloade.

Filoplysninger

Abonnenter
15
Bedømmelse
2.5/5.0 — Gennemsnit
Status
Ikke downloadet endnu
Dagens downloads
0

Timeline

  • Opdateret til version 0.62

  • Opdateret til version 0.6

  • Opdateret til version 0.5

  • Opdateret til version 0.3

  • Opdateret til version 0.21

  • Opdateret til version 0.2

  • Initial File Release

Gennemsnit
Baseret på 1 vurderinger
😢
0
trist
😠
0
vred
😮
0
chokeret
🙏
3
taknemmelig
😂
0
underholdt
😍
1
i kærlighed

Tilladelser

Tilladelse til at uploade
Du må under ingen omstændigheder uploade denne fil til andre websteder.

Tilladelse til ændring
Du skal først have min tilladelse, før du må ændre eller forbedre min fil.

Tilladelse til omdannelse
Du må under ingen omstændigheder konvertere denne fil.

Tilladelse til brug af aktiver
Du skal først have min tilladelse, før du må bruge aktiver fra min fil.

© DTwasanET - All rights reserved. Enhver genindlæsning eller videredistribution af denne fil uden forudgående skriftligt samtykke fra forfatteren er forbudt. Denne Flight Simulator 2020 Mod blev skabt af DTwasanET and shared in Scenery Enhancements » Regional Airports til Microsoft Flight Simulator.


3 Kommentarer

thak you v6 ok

I have dropped parachutists here many times, please be sure to show the runway as being very rough and very short, the local farmer uses most of the runway for storage of hay or stuff , i look forward to seeing how you get on

Roadmap
Disse varer er i øjeblikket på listen og vil snart blive behandlet!
Backlog
Forslag, fejl og idéer til fremtiden.

  • Version 0.62 September 19, 2021

    Rebuild with Update 6 and SDK 14.1 with minor corrections.
    One bomber was a bit underground and one Start point in a hangar was wrong.

  • Version 0.6 August 16, 2021

    Rebuilt and tested in Update 5 and SDK 14.0

  • Version 0.5 June 08, 2021

    Added perimeter fence.

    Added Control Tower.

    Improved Hangar and bomber models.

  • Version 0.3 March 06, 2021

    Added 5 Type 2 Hangars and 30 WW2 Bombers.
    You can start from inside two of the Hangars.
    Minor Corrections to Runways and Taxiways.

  • Version 0.21 January 19, 2021

  • Version 0.2 January 18, 2021

    Added all Taxiways, the 30 dispersal points and the five original WW2 Hangers in correct positions.

  • Lanceret December 29, 2020

    Den første udgave af denne fil er netop lanceret. Velkommen om bord!

Ofte stillede spørgsmål

Har du spørgsmål? Find din løsning her.


Der er ret tomt herovre.

Donationer

Disse brugere har doneret til DTwasanET for at han fortsat kan lave fantastiske tilføjelser, som alle kan få glæde af.

Afhængigheder

These add-ons may be required or recommended to use.


Der er ret tomt herovre.