A batch of RPN scripts to allow you to configure your hardware devices to control various Fenix Simulations A320 cockpit switches including:
- FCU
- EFIS
- External lighting
- ADIRS
- ECAM
- Fuel
- Pressure
- Anti-ice
- Engine masters and mode
- Tiller pedal disconnect
- Transponder
- Wipers
I have also included an example template for the Honeycomb Bravo which covers most of the FCU controls, including:
- Push/pull actions for SPD, HDG, ALT, and VS
- Rotary controls for SPD, HDG, ALT, and VS
- LOC
- APPR
- AP1 and AP2
I plan to map many more of the available buttons and switches in the cockpit. If you'd like to help me by contributing to the project, you can find it on GitHub here.
Installation
Import the fnx320_scripts.xml file using the Scripting > Import scripts option in AAO.
You can then assign these to buttons as you can any other simulator event. I've included a screenshot from the AAO documentation demonstrating this above.
List of scripts provided
The full list of scripts provided can be found here.
5 months ago
LCYCowboy
FANTASTIC JOB TO THE CREATOR!! SAVED ME A TON OF TIME AND HEADACHE!!!! Only thing I would change, I'd add the different lights (landing, taxi, beacon, etc) to the switches instead of FD, pedal disc, etc. Thanks again!
8 months ago
8 months ago
FieselWiesel
savagemedic911
8 months ago
8 months ago
savagemedic911
FieselWiesel
Can anybody help me, this script worked excellent for me but not anymore. I see that the butoons are correctly configured in AAO but it doesn't do anything in the sim.....what am I doing wrong?
2 years ago
8 months ago
savagemedic911
timothykok1980
spent forever trying to figure out how to get the autopilot rotary knobs to work with axis and ohs and fenix a320 on the bravo throttle using the MCP Combo FENIX A320.tmpl but i cant get it. Did anyone figure this out? all the other switches work but turning the left knob to say IAS and trying to increase speed with the right knob for example doesnt work
2 years ago
I figureit out if anyone is struggling:
The combos are already inputted however for some reason in order for it to work you have to click each individual action (for example hdg increase) in axis and ohs, click the combo key and rebind it. Now the rotaries work.
2 years ago
nyjailhouse
nyjailhouse
Was not able to get the tiller function to work.
2 years ago
Dreamflight767
I have downloaded the scripts and the template and the knobs (right and left) do not work, how should I do it? which command should I add? thank you
2 years ago
Alessandro1922
Hello,
Thank you for your amazing program
I have set up and it works great with everything except the rotary on the fcu (speed hdg, alt v/s and baro)
What can i possibly be doing wrong? Please help
2 years ago
I did it, i was setting everything up with cold and dark. The thing is that they dont rotate or push/pull visually, but the job is done. Great!!!
2 years ago
arpalaiol
arpalaiol
This is an amazing piece of work you have done here, thanks a lot.
Is it possible to trigger the animation of the push and pull events for the FCU? I'm a noob in AAO and cannot find a way to do this.
2 years ago
sure. i realized this with the "long click" function. (see manual after installation, chapter 3.6.2.
Short click = push command
Long click = pull command
2 years ago
vinKaiZen
raffzeit
The Bravo controls dont work until you reassign them. When turning the right rotary knob on the bravo it controls all of the functions (HDG, ALT ETC) no matter what position the left rotary knob is at. What am I doing wrong
2 years ago
I replaced all the GUID of the joystick in the tmpl file with the one of mine. That way you don't need the reassign all buttons.
The original file contains this GUID: <guid>55dc1710-53a1-11ec-8001-444553540000</guid>
Find the GUID of your controller in AAO in Hardware -> Hardware Change.
Here you can see your controllers with name and GUID.
There might be an easier way to avoid the reassigning issue, but it worked for me.
2 years ago
raffzeit
etm270344
Thanks for this script! You just made my day
2 years ago
zeanx
is there a button mapped to toggle the Tiller Disconnect?
2 years ago
kfarrow
This is incredible!!! I have a hw controller for my ecam buttons. But I am running into an issue where once I press the button once, I cannot do it again later. e.g. Pressing APU will work on the first time, and then if I press Eng it will take me to the Eng page, but if I attempt to press APU button again, it stays on ENG. Has anyone run into this issue?
2 years ago
zekethepilot
Hi there...I looked at the list of scripts you have mapped, and I see one each for AP1 & AP2. It's my understanding that there is another, separate command that maps the red AP disconnect button on the sidestick, which supposedly doesn't trigger the Master Caution when used. Do you know if this mapping actually exists, and if so, could it be added? Thanks!
2 years ago
MrJingles
Hey, can you find the trim and rudder trim inputs as well? Thanks for your work, you're doing an amazing job!
2 years ago
cptn.dp